The tap is designed for high pressure supply only and requires a minimum of 1.0 bar, with a preferred range of 1.0–1.5 bar. ⅜'' BSP connectors are required and are not supplied. A Ø35 mm tap hole is necessary for installation, and flexible connector pipes of 700 mm length with ⅜'' nut are included in the scope of supply.

A heavy duty metal tap stabilising bracket should be fitted when required. One planning note references item number 450775 for this bracket, while the scope of supply refers to fitting a metal stabilising bracket if required, with item number 513383.

The swivel range is 140°, and a side view with key dimensions is provided to assist with assessing height, reach and clearances during planning.