| Product name |
Classic Fusion Round |
| Tap type |
Boiling–water tap and mixer tap combined |
| Water functions |
Hot, cold and 108°C filtered boiling water (with PRO3); filtered chilled, filtered sparkling and 108°C filtered water (with CUBE) |
| Handle safety |
Child–proof double push–and–turn handle |
| Spout |
Double–walled, round spout |
| Finish – polished chrome |
Polished chrome (CHR) |
| Finish – stainless steel |
Stainless steel (RVS) |
| Finish – patinated brass |
Patinated brass (PTN) |
| Tap hole size |
Hole Ø35 mm (tap hole Fusion: 35mm) |
| Maximum worktop thickness |
Max. thickness 50 |
| Selected dimension values shown |
251,5; 220; 500; 214; 291; 77; 366; Ø23; Ø50 (as indicated) |
| Tank (boiling water) |
PRO3 |
| Tank voltage (PRO3) |
230V |
| Tank wattage (PRO3) |
1600W |
| Tank capacity (PRO3) |
3 litres |
| Heating–up time (PRO3) |
10 minutes* (average value) |
| Stand–by power (PRO3) |
10W* (average value) |
| Tank height (PRO3) |
46,7cm |
| Total height requirement (PRO3) |
54cm |
| Tank diameter (PRO3) |
15cm |
| Minimum mains pressure |
200kPa (2 bar) |
| Minimum hot water pressure |
200kPa (2 bar) |
| Recommended pressure |
200–400kPa (2–4 bar) |
| Mounting bracket |
Mounting bracket optional: yes |
| Safety feature (PRO3) |
Maximum temperature / pressure relief valve 8 bar |
| Water filter (PRO3) |
HiTAC® water filter: High Temperature Activated Carbon |
| Tank (chilled/sparkling) |
CUBE |
| Tank voltage (CUBE) |
220–240 V |
| Tank wattage (CUBE) |
100 W |
| Flow rate – filtered chilled |
2,4 litres/min |
| Flow rate – filtered sparkling |
2 litres/min |
| Chilling time (CUBE) |
30 min* (average value) |
| Standby consumption (CUBE) |
5 W* (average value) |
| Tank height (CUBE) |
50 cm |
| Tank width (CUBE) |
15,3 cm (22,3cm including CO₂ cylinder) |
| Tank depth (CUBE) |
27 cm (34cm including CO₂ cylinder) |
| Minimum water pressure (CUBE) |
200kPa (2bar) |
| Maximum water pressure (CUBE) |
400 kPa (4bar) |
| Maximum CO₂ pressure (CUBE) |
400 kPa (4bar) |
| Water filter (CUBE) |
HF + AC |
| Energy rating |
Not stated in source |
| Warranty |
Not stated in source |
*These values are averages.
The Classic Fusion Round is installed using a 35mm tap hole with a maximum worktop thickness of 50. It connects to both hot and cold water supplies and to the PRO3 tank for 108°C filtered boiling water. Minimum mains and hot water pressure of 200kPa (2 bar) are required, with a recommended pressure range of 200–400kPa (2–4 bar). A mounting bracket for the PRO3 tank is optional.
When combined with the CUBE, the system additionally provides filtered chilled and filtered sparkling water. The CUBE operates at 220–240 V with 100 W wattage, and requires water pressure between 200kPa (2bar) and 400kPa (4bar). CO₂ pressure may be up to 400 kPa (4bar). The PRO3 tank incorporates a maximum temperature and pressure relief valve set at 8 bar for safety.
The HiTAC® water filter in the PRO3 tank uses High Temperature Activated Carbon, while the CUBE uses an HF + AC water filter. The child–proof double push–and–turn handle is used to operate the boiling water function.