| Tap model |
Fusion Round |
| Tap functions |
Hot, cold and boiling water from a single tap; filtered chilled and filtered sparkling water with CUBE |
| Spout type |
Double-walled, round spout |
| Safety handle |
Child-proof double push-and-turn handle |
| Finishes |
Stainless steel (RVS), polished chrome (CHR), gunmetal (GME), black (BLK), rose copper (RCO), patinated brass (PTN), gold (GLD) |
| Tap overall height |
Not stated in source |
| Tap projection |
500 |
| Tap body section dimension |
220 |
| Vertical adjustment |
±70 |
| Maximum worktop thickness |
50 |
| Tap hole diameter |
Hole Ø35 mm; Tap hole Fusion: 35 mm |
| Other diameters shown |
Ø23, Ø40, Ø50 |
| Tank (boiling/warm) |
COMBI |
| COMBI voltage |
230V |
| COMBI wattage |
2200W |
| COMBI capacity |
7 litres |
| COMBI heating-up time |
20 minutes |
| COMBI stand-by power consumption |
10W* (average) |
| COMBI tank height |
49 cm |
| COMBI total height requirement |
55 cm |
| COMBI tank diameter |
20 cm |
| COMBI min. mains pressure |
200 kPa (2 bar) |
| COMBI recommended pressure |
200–400 kPa (2–4 bar) |
| COMBI volume at 40°C |
27 litres* (average) |
| COMBI volume at 60°C |
15 litres* (average) |
| COMBI mounting bracket |
Optional: yes |
| COMBI temperature regulation |
Thermostatic |
| COMBI safety feature |
Maximum temperature/pressure relief valve 8 bar |
| COMBI water filter |
HiTAC® High Temperature Activated Carbon |
| Water heating energy label |
Declared load profile: XXS; Class: A |
| Water heating energy efficiency |
36% |
| Annual electricity consumption |
511 kWh/A |
| Warm water temperature settings |
40–60°C |
| Tank (chilled/sparkling) |
CUBE |
| CUBE voltage |
220–240 V |
| CUBE wattage |
100 W |
| Flow rate filtered chilled water |
2,4 litres/min |
| Flow rate filtered sparkling water |
2 litres/min |
| CUBE chilling time* |
30 min (average) |
| CUBE standby consumption* |
5 W (average) |
| CUBE tank height |
50 cm |
| CUBE tank width |
15,3 cm (22,3 cm including CO₂ cylinder) |
| CUBE depth |
27 cm (34 cm including CO₂ cylinder) |
| CUBE minimum water pressure |
200 kPa (2 bar) |
| CUBE maximum water pressure |
400 kPa (4 bar) |
| CUBE maximum CO₂ pressure |
400 kPa (4 bar) |
| CUBE water filter |
HF + AC |
| Mixing valve |
40°C–60°C inlet combination mixing valve (cold connection) |
| Pressure reducing valve |
Pressure reducing valve specified |
| Filtered boiling temperature |
108°C filtered |
*These values are stated as averages.
The Fusion Round is shown in an installation overview with the COMBI tank, delivering hot, cold and 108°C filtered boiling water. The system uses a 40°C–60°C inlet combination mixing valve and includes a maximum temperature/pressure relief valve rated at 8 bar. A mounting bracket for the COMBI tank is optional.
When combined with the CUBE tank, the tap can provide filtered chilled and filtered sparkling water in addition to boiling water. The CUBE operates at 220–240 V with a 100 W load, and delivers filtered chilled water at 2,4 litres per minute and filtered sparkling water at 2 litres per minute. Minimum and maximum water and CO₂ pressures are specified at 200–400 kPa (2–4 bar).
The warm water temperature settings of the water heater are between 40–60°C, and the system is equipped with HiTAC® High Temperature Activated Carbon filtration for the COMBI tank and HF + AC filtration for the CUBE tank.
