| Product name |
Fusion Round |
| Tap type |
Boiling-water tap and mixer tap combined |
| Spout |
Double-walled, round spout |
| Safety handle |
Child-proof double push-and-turn handle |
| Tap hole diameter |
35mm (Hole Ø35) |
| Overall height (tap) |
500 mm |
| Spout reach (approx.) |
251,5 mm |
| Base diameter |
Ø50 |
| Spout tube diameter |
Ø23 |
| Other stated diameters |
Ø40 |
| Maximum worktop thickness |
Max. thickness 50 mm |
| Boiling / hot water temperature (filtered) |
108°C filtered |
| Warm water temperature settings (heater) |
40–60°C |
| Inlet combination mixing valve |
Cold 40°C–60°C inlet combination mixing valve |
| Available finishes |
Stainless steel (RVS), polished chrome (CHR), gunmetal (GME), black (BLK), rose copper (RCO), patinated brass (PTN), gold (GLD) |
| Tank type (hot/boiling) |
COMBI |
| COMBI voltage |
230V |
| COMBI wattage |
2200W |
| COMBI capacity |
7 litres |
| COMBI heating-up time |
20 minutes |
| COMBI stand-by power consumption |
10W* (average value) |
| COMBI tank height |
49 cm |
| Total height requirement (COMBI + connections) |
55 cm |
| COMBI tank diameter |
20 cm |
| Minimum mains pressure (COMBI) |
200 kPa (2 bar) |
| Recommended pressure (COMBI) |
200–400 kPa (2–4 bar) |
| Volume at 40°C (COMBI) |
27 litres* (average value) |
| Volume at 60°C (COMBI) |
15 litres* (average value) |
| Mounting bracket (COMBI) |
Optional: yes |
| Temperature regulation (COMBI) |
Thermostatic |
| Safety feature (COMBI) |
Maximum temperature/pressure relief valve 8 bar |
| Water filter (COMBI) |
HiTAC® water filter: High Temperature Activated Carbon |
| Declared load profile |
XXS |
| Water heating energy efficiency class |
A |
| Water heating energy efficiency |
36% |
| Annual electricity consumption |
511 kWh/A |
| Tank type (chilled/sparkling) |
CUBE |
| CUBE voltage |
220–240 V |
| CUBE wattage |
100 W |
| Flow rate filtered chilled water (CUBE) |
2,4 litres/min |
| Flow rate filtered sparkling water (CUBE) |
2 litres/min |
| Chilling time* (CUBE) |
30 min (average value) |
| Standby consumption* (CUBE) |
5 W (average value) |
| CUBE tank height |
50 cm |
| CUBE tank width |
15,3 cm (22,3 cm including CO² cylinder) |
| CUBE depth |
27 cm (34 cm including CO² cylinder) |
| Minimum water pressure (CUBE) |
200 kPa (2 bar) |
| Maximum water pressure (CUBE) |
400 kPa (4 bar) |
| Maximum CO² pressure (CUBE) |
400 kPa (4 bar) |
| Water filter (CUBE) |
HF + AC |
* These are average values.
The Fusion Round tap is installed with a tap hole of 35 mm and is suitable for worktops up to 50 mm thick. It works with a cold 40°C–60°C inlet combination mixing valve and can be used with a pressure reducing valve where required.
When installed with the COMBI tank, it provides hot, cold and boiling water, supported by thermostatic temperature regulation and a maximum temperature/pressure relief valve set at 8 bar. The HiTAC® High Temperature Activated Carbon filter is integrated for water treatment.
When combined with both COMBI and CUBE tanks, the system supplies filtered chilled, filtered sparkling and 108°C filtered water from the same Fusion Round tap. The CUBE unit requires water pressures between 200 kPa (2 bar) and 400 kPa (4 bar) and uses HF + AC water filtration.