Installation overview

The system is installed following numbered steps from 1 to 10, showing how each component is assembled and connected beneath the sink. The diagrams cover the initial attachment of the waste body, alignment of the sealing and bowl components, assembly of the pipework, and insertion of the operating element. The illustrations distinguish incorrect and correct orientations to ensure proper function.

Torque and tool guidance

A tightening torque of 1,5–4 Nm using an 8 mm tool is indicated for a key fastening point, and a separate fastening is limited to a maximum of 0,5 Nm. The use of a PZ 2 tool is shown for specific screws or fixings. These values help to prevent over– or under–tightening during assembly.

Optional configurations

An “Option” layout is depicted, indicating alternative positions and routing of the pipe components. This suggests flexibility in arranging the waste system within the space available under the sink while keeping the essential connection principle unchanged.

Operation

The waste can be opened and closed using a turning movement. The operating part is marked with “open” and “close” to show the direction of rotation for each function.

Care and cleaning

• Do not clean using products containing Chlor, chlorine (Cl), as highlighted by a specific prohibition symbol.
• The illustrations show that certain abrasive tools and methods should not be used on the sink rim and components.
• The diagrams indicate that the waste strainer should not be cleaned in a way that could damage its surface or mechanism.

Service and identification

An illustration with the code 20742x and separate digits suggests that the product can be identified by its article number for service queries. BLANCO Service contact information is provided for further assistance.