Installation overview

The system is installed using a sequence of numbered steps. Components labelled 1, 2, 3, 4 and 5 are assembled to the sink outlet, followed by connection of the pipework (including part 6) beneath the sink. The illustrations indicate correct and incorrect positioning of parts within the sink opening and show how to insert and secure the upper assembly (part 7).

A torque range of 1,5–4 Nm with an 8 mm reference is specified for one fixing stage, and a separate maximum torque of 0,5 Nm is shown for other elements. PZ 2 tooling is mentioned as an option for certain screws or fittings. A minimum clearance of 15 mm is required in the installation area.

Operation

The InFino® waste features an “open” and “close” function, illustrated with an operating motion in the bowl. The control allows the user to open or close the waste to let water drain or be retained in the sink.

Service and identification

The documentation shows a service scenario in which an installer (step 9) and end customers (step 10) may refer to information. An identification label “20742x” and a row of digits (2 0 7 4 2 x) are depicted, supporting correct product reference when contacting BLANCO service.

Cleaning and care

Icons reference “Chlor, chlorine, Cl” alongside cleaning imagery, indicating that chlorine-based agents are relevant to care instructions. Additional images show recommended and not-recommended cleaning or handling actions on the sink area and waste components, including a depiction of the waste basket being handled above a container.

Specific cleaning agents, procedures and prohibited products beyond the mention of chlorine are not stated in source.