Correct ventilation is essential for proper cooling performance, energy consumption and lifespan. Heat generated at the condenser fins on the back of the minibar must be transferred with sufficient airflow to the ambient air. Free circulation of air around the cooling unit is required.

• The minibar must be placed on a stable surface that is level in both directions.
• For HiPro NTE series (including this model), the free ventilation space for incoming and outgoing air should be at least 200 cm² each.
• Ventilation must be provided in a chimney-like flow of air with the air inlet positioned below the unit and the air outlet above; side ventilation must be avoided.
• Air passing through the ventilation duct must not be preheated or warmed by any source of heat.
• Ventilation grills, if used, must have a free opening area for incoming and outgoing air as specified (at least 200 cm² each for HiPro NTE series).
• At the rear of the fridge, leave a minimum distance of 20 mm between the cooling unit and the furniture wall.
• The outflow air vent must exit into free space in the room and must not vent into an enclosed space such as a cupboard, case good or ceiling void.
• Do not place the fridge in direct sunlight or next to a heating radiator, window or curtains.
• Never cover ventilation grills or slots.
• The mains plug/socket must be freely accessible once the fridge has been installed.

Product warranty is only valid if the minibar is installed, used and maintained as described in the installation and product manuals and in accordance with applicable laws and regulations.